Troubleshooting
Fix Shopify connection problems, from a rejected address to an import that does not start.
Most Shopify issues come from three causes, an address Fullmetrix does not recognize, a Shopify account that is not allowed to install apps, or an authorization that did not go all the way through. Look below for the message or situation that matches what you see.
Before retrying anything, write down the exact message and the time. Do not click Disconnect to "start over", because that action deletes the data already imported.
Some messages returned by the connection are shown in French, even when the app is in English. They are quoted below as they appear, with their meaning.
The store address is rejected
"Adresse de boutique invalide"
This means "invalid store address". Fullmetrix could not read what you entered as an address. Check that there are no spaces, accents or special characters. Enter only the domain name, for example my-store.myshopify.com. IP addresses and internal host names are always rejected.
"Aucune boutique Shopify trouvée à cette adresse"
The full message is Aucune boutique Shopify trouvée à cette adresse. Essayez votre adresse en .myshopify.com., meaning that no Shopify store was found at this address. Fullmetrix did visit your domain but found no Shopify store behind it. This happens when the domain redirects to another site, when it was just changed, or when a protection service blocks automated visits.
Enter the .myshopify.com address. You will find it in your Shopify admin under Settings, then Domains. Do not use the address of the admin page that starts with admin.shopify.com/store/.
Fullmetrix refuses to add the store
"Une boutique ... est déjà connectée à cette organisation"
This means a store on another platform is already connected to the organization. An organization only holds stores on the same platform, and the message names the platform already connected. To connect Shopify, create a new organization from the organization switcher at the top of the sidebar. If the old store is no longer used, you can also disconnect it, knowing that its imported data will be deleted.
"Limite de 3 connexions e-commerce atteinte"
An organization accepts at most three stores. Remove a store you no longer use, or create another organization. Reconnecting a Shopify store that is already there does not count as a new connection.
"Cette boutique est déjà connectée à une autre Organization"
The same Shopify store can only belong to one organization. Open the organization that already holds it and use that one, or disconnect the store from that organization before starting again.
"Cette boutique a déjà bénéficié d'un essai Fullmetrix"
Each store gets the free trial only once. To reconnect it in a new organization that is still on trial, a subscription is required. Billing is explained in Billing.
Shopify opens a different store
Shopify uses the session open in your browser. If you are signed in to several stores, it may offer the wrong one.
- Do not approve anything on the Shopify page, close it.
- In another tab, open the admin of the right Shopify store.
- Go back to Fullmetrix and start the connection again with that store's
.myshopify.comaddress. - On the Shopify access page, check the store name before clicking the approval button.
The Install button does not appear in Shopify
Your Shopify account is probably not allowed to install apps. The store owner always has this right. For a staff member, the owner must turn on the permission to manage and install apps. If Shopify also asks to approve charges, the permission to approve app charges is required. The Shopify help on installing apps details these rights.
Shopify shows Update instead of Install
This is normal when Fullmetrix is already installed on the store and asks for additional access. Read the list and click Update. Your existing connection is kept and we read the full catalog again. There is nothing to uninstall.
You are back in Fullmetrix but the store is not connected
If the store card, in Settings, then Integrations, shows Waiting for OAuth authorization, the authorization did not complete in Shopify. You may have closed the page, clicked cancel or approved on another store.
Simply start the connection again with the same address. Fullmetrix picks up the pending connection and does not create a second one. During the setup wizard, click Shopify again in the list of platforms.
The card shows "Session Shopify expirée"
The full message is Session Shopify expirée. Reconnectez la boutique depuis les intégrations., meaning the Shopify session has expired and the store must be reconnected from Integrations. The authorization given by Shopify is no longer valid. New orders stop coming in until you renew it.
- Open Settings, then Integrations.
- On the Shopify card, click Reconnect.
- In Shopify, approve the access with Update.
The same Reconnect button appears when we need new access. Your data is kept in both cases.
The import does not start or stops
The store card, in Settings, then Integrations, tells you where the sync stands.
| What you see | What it means | What to do |
|---|---|---|
| Import in progress with a percentage | The first import is running | Wait. You can use the app in the meantime. |
| Green dot and Last sync | Everything works | Nothing |
| Red message under the card, Resume and Reset buttons | The last sync failed | Read the message, fix the cause, then click Resume, or Reset if Resume isn't offered |
| Auto-sync disabled after N consecutive errors | Automatic updates are paused after several failures | Fix the cause, then click Resume or Reset. The Sync button named in the message doesn't show in this state |
Resume continues from where the import stopped. Reset sets the progress back to zero and restarts the sync. Orders already imported are kept. Click these buttons once, then give the sync a few minutes. Each state is detailed in Sync status.
The app is installed but visitor tracking receives nothing
- Check that the store card is connected in Fullmetrix. Seeing Fullmetrix in the Shopify app list is not enough if the authorization was not completed on the Fullmetrix side.
- Wait a few minutes after connecting, while tracking is set up on the store.
- If the store is password-protected, visitors cannot enter it and no event is sent.
- A cookie consent manager can block tracking until the visitor accepts. Run your test after accepting cookies.
- Check delivery in Tracking script, which shows the date of the last event received.
Contact support
If none of the above solves the problem, contact us with this information.
- The store's
.myshopify.comaddress. - The name of your Fullmetrix organization.
- The exact message and the time it appeared.
- The button Shopify showed, Install or Update.
- What the store card shows in Settings, then Integrations.
Never send your Shopify password, or an address copied from the browser bar during authorization, because it can contain session information.